The motherboard is one of the most important parts of a computer. In fact, it is a connecting link between all devices that make up the architecture of the system unit, since they all connect to it. This feature makes replacing the motherboard a long and tedious process that requires maximum attention, concentration and restraint. The replacement process itself does not seem particularly difficult, but nevertheless, there are a huge number of nuances and pitfalls in it.
Necessary
- Phillips screwdrivers in different sizes
- Thermal paste
- Microfiber cloth
Instructions
Step 1
Choosing a motherboard. When choosing a new motherboard for your existing devices, you must consider the following elements: 1. Processor socket.
2. Video adapter connector.
3. Model of random access memory.
4. Type of hard drive connection.
5. The number of PCI ports.
Write down all of these parameters (5th as needed) and buy a motherboard that meets all your requirements.
Step 2
Removing the old motherboard. Remove the left cover of the system unit. Disconnect all devices from the motherboard and remove them. The hardest part is removing the processor and its heatsink. Be careful: do not touch the processor pins with your hands, and in case of erasing thermal paste, apply a new one when connecting to a new motherboard. Turn off the power to the motherboard (usually two loops). Remove all screws that secure the motherboard to the system unit and remove the old motherboard.
Step 3
Install the new motherboard and screw it securely to the box with the screws. Connect the power to the motherboard, and then all the devices you have in stock. Pay attention to a few points: 1. If you have several strips of RAM, connect the same strips to connectors of the same colors. This improves the performance of the RAM.
2. When connecting the processor, do not make a mistake with its location relative to the socket.
3. In case your hard drive is of IDE format, and the new motherboard works with SATA, it is possible to connect a hard drive to DVD cables.
