Disassembling a Samsung laptop on your own for no good reason is a thankless task. A lot of small parts strive to jump out and get lost, and plastic fasteners - to break.
Instructions
Step 1
Unplug the laptop from power, remove the battery.
Step 2
After that, you need to remove the keyboard, most often it is secured with two screws that you can find on the back of the computer. Turn the Samsung over and unscrew the two fasteners by yourself.
Step 3
Turn the laptop over again. Using a thin screwdriver, gently pry the keyboard off, hook the bottom of the keyboard with your fingers and pull upward from you. The holders, which are located on the sides, will "release" the keyboard. Place it next to the case as you need to detach it from the motherboard.
Step 4
The line of disconnecting the cable, which is removed by pressing the latch, which presses it to the contacts of the "motherboard". The keyboard is removed. There remains one more loop and two bundles of wires with connectors.
Step 5
Turn the laptop over, after closing it, and unscrew all the bolts, after that you need to remove the DVD drive. The Winchester is removed with a black label, just pull it to the side.
Step 6
Remove the top cover. Under it is a number of microcircuits and various functional devices, they are fastened with three bolts: one at the bottom and two others at the top, closer to the screen. Unscrew the bolts, unscrew the two loops, which are also located on two opposite sides of the microcircuit.
Step 7
Remove the WI FI module by unscrewing one of the above bolts. You need to detach the monitor from the main body of the device, as a rule, it is fastened with bolts, but in some models there are plastic holders. Don't break them.
Step 8
The motherboard can be removed without any problems. It consists of four parts, you need to shoot them all. Result - you are left with one lid. Dismantle the fan by unscrewing the fastening bolts.
Step 9
It is advisable to put all the removed fasteners in small containers so that they are not lost. some of the bolts have plastic tabs, it is advisable to mark on which Samsung elements they were located, otherwise problems may arise during assembly.
