How To Adjust The Cooler Speed

Table of contents:

How To Adjust The Cooler Speed
How To Adjust The Cooler Speed

Video: How To Adjust The Cooler Speed

Video: How To Adjust The Cooler Speed
Video: How to set up SpeedFan - Free fan control software 2024, December
Anonim

If the system unit of your computer makes a lot of noise, and after turning it off, silence in the room immediately becomes noticeable, this is not a normal situation. The noise from the computer should not exceed the permissible limits, and it certainly should not interfere with your sleep or hear what your neighbor is telling you.

How to adjust the cooler speed
How to adjust the cooler speed

It is necessary

  • - a computer
  • - SpeedFan program.

Instructions

Step 1

Perhaps your system unit is clogged with dust (over time, this happens with almost all personal computers) - clean it carefully with a vacuum cleaner. If it's clean, you may just need to adjust the fan speed. Launch your browser and enter the name of the program - SpeedFan in the search bar. Follow one of the first links and download the program to your hard drive. You can download the program on one of the software portals www.softportal.com. Install the program by running the setup file

Step 2

Run the program. You will need to wait a little while the program analyzes the operating system. If you find it difficult to navigate the labels in English, click on the Configure button and change the language to Russian on the Options tab. Now you need to enable hardware support for regulating the fan speed on the motherboard. Click on the "Configuration" button, then - the "Advanced" button. Change the value to Software contolled and click "OK". If your motherboard was detected by the program, then this value will be set immediately.

Step 3

Adjust the fan speeds in the computer by clicking on the control arrows. Do not underestimate the figures greatly, since the fans are installed in the computer system unit not for noise, but to provide cooling to spare parts. If the components overheat, it will damage the computer. Try to choose the most optimal values of the parameters so that the cooler speed is not low, but does not interfere with your surroundings with your sound.

Step 4

SpeedFan also displays the temperature of the components, and if you leave it running in the taskbar, you can monitor the temperature conditions inside your computer.

Recommended: