Canon ink cartridges of various models are similar in design and internals. Therefore, in order to refill cartridges of this brand, you can use the same scheme.
It is necessary
- You will need:
- - InkTec ink;
- - thin drill;
- - syringes;
- - gloves.
Instructions
Step 1
First a few caveats If your printer has at least one empty ink cartridge, never print. In this case, not only the printing will upset you, but the printer itself may be harmed - the print head itself may be damaged. This happens due to overheating - a lack of ink in special ink channels can greatly increase the temperature of the heating elements, those that regulate the ejection of ink drops from the nozzles, which can disable them. part. In addition, you will not be able to accurately fill in ink, and it can spill both on the print head and on the rest of the printer, and this will inevitably lead to blots.
Step 2
Pull the cartridge out of the printer.
Step 3
Take a special orange plug and close the outlet of the cartridge with it, for convenience it can be fixed with tape. The plug should be included with the cartridge, if for some reason it is not there, you can close the hole with your finger, for this put a latex glove on your hand.
Step 4
Then take a thin drill, about 2 millimeters wide, and at the level of the oval with the inscription "PUSH" carefully make a hole in the cartridge.
Step 5
Draw ink into the syringe and slowly "pour" it into the drilled hole. Take an individual syringe for each color.
Step 6
Close the filler hole with a plug.
Step 7
Now you can free the cartridge exit and put it back in the printer. You have charged the cartridge with new ink and it is ready to use.
