In many desktop computers, you can independently set the fan speed. This allows you to ensure the optimal noise level without overheating important elements of the PC.
It is necessary
- - Speed Fan;
- - AMD Over Drive.
Instructions
Step 1
It is very important to identify problems in the operation of the fans in a timely manner. Install the Speed Fan software and run it. Wait while the utility collects information about the temperature of those devices to which the sensors are connected. Open the Readings tab and view the temperature of the desired devices. At the bottom of the working window, find several with cooler numbers. Change the rotation speed of the desired fan by pressing the Up or Down arrow several times.
Step 2
If you have reduced the rotational speed of the cooler blades, then wait a while until a stable temperature of the device to which this fan is attached is established. Make sure that it does not exceed the permissible limits. If you do not want to constantly monitor the temperature readings, then check the box next to the Automatic fan speed parameter. The program will automatically increase the fan speed if the temperature approaches a critical level.
Step 3
Unfortunately, Speed Fan does not work with all motherboard models. In this case, we recommend using the AMD Over Drive utility. Install and run this program. In the warning window that appears, click the Ok button. Expand the Performance Control tab and go to the Fan Control menu.
Step 4
Set the required fan speed by moving the desired sliders. Click the Apply button to apply the specified parameters. Now expand the Preferences tab and open the Settings menu. Find Apply my last settings when system boot. Check the box next to it. This will allow the program to automatically load the specified parameters of the coolers. Click the Ok button, close the program and restart your computer.
