You can copy information from any working disk without any problems. A few minutes are enough for this. If necessary, you can burn the disc in a special way so that its contents cannot be copied. In this way, you will protect yourself from loss of information.
Necessary
Computer, Autolock Wizard program, CD-RX disks, Internet access
Instructions
Step 1
To burn protected discs, you need the Autolock Wizard. Download and install it on your computer. You will also need to purchase CD-RX discs. After you have installed the program, insert the disc into your computer's drive. For subsequent operations, you must have administrator rights.
Step 2
In the first window of the program, select the interface language and click "Next". The following window will appear, in which click on the line "Burn protected discs using CD-RX models", then - "Next". Another window will pop up, where you need to put a checkmark in front of those disk protection parameters that you need. Then click "Next".
Step 3
In the next window, do not change anything by clicking "Next". Then click on the "Browse" button and select the files you want to burn. Click "Next" again and in the list of files that appears, select those for which you need protection. Next, enter the disk label (it is not necessary to change the default one), after which a window will appear where you can start the process of recording files. Check the box "Start recording immediately" and click "Next". A window with disc recording settings will pop up, click "Next". The process of recording the disc will begin, the end of which you will be informed in the program window.
Step 4
CD-RX discs have built-in write protection. They can also be written in the usual way, although the degree of protection will be low. To burn the protected disk in the usual way, right-click on the file you want to write to the protected disk. Select the "Copy" command. Then right-click on your drive icon and click "Paste". Thus, copy all the files you need. Then insert the CD-RX disc into the optical drive. Click on the drive icon with the right mouse button and select the "Burn to disc" command. The files will be written.
