To change the voice of a speaking person in Skype programs and its analogues, there is a special application that is quite easy to master. It is available for different versions of Windows, has a clear interface and practically does not load the system.
Necessary
AV Voice Changer Diamond program
Instructions
Step 1
Download AV Voice Changer Diamond from the developer's official website or any other trusted source. Open the downloads folder and start the software installation. Install AV Voice Changer Diamond on your computer following the instructions in the menu items. Perform the initial configuration of the program you have installed, setting general parameters for its use and integration with other programs on your computer.
Step 2
Make sure you are connected to the internet. Launch Skype, Mail.ru Agent or any other program that you use to chat over the network. Log in and then launch the newly installed AV Voice Changer Diamond software. Make sure the microphone connected to your computer is working properly. Also in the sound card settings in the control panel, make sure the microphone is echoed off. Set the maximum audibility level at which your voice sounds clear and intelligible.
Step 3
When sending a call to a person in the online conversation program, turn on the AV Voice Changer Diamond program, in its settings, specify the necessary deviations from your real voice. If necessary, use special templates that make the voice childish, adult, higher or lower, and so on.
Step 4
If you are having trouble hearing your voice, make sure you set the microphone volume to the optimum level on your computer. This usually happens when the volume is too high or too low, in which case the setting should be done in the chat software or directly in the operating system itself. Also, malfunctions can be caused by low-quality equipment.
