A rechargeable battery is a rather vulnerable element of a mobile computer. To prolong the battery life, it is recommended to avoid using this device unless absolutely necessary.
Instructions
Step 1
If you are using your laptop at home regularly, remove the battery. This will allow not to use up the battery resource. The fact is that each battery is designed for a certain number of charge and discharge cycles. The more often you use the battery, the faster the cell will fail.
Step 2
Turn off your mobile computer. Be sure to make sure that the operating system has completely shut down. Some laptops, after pressing the Power button, switch the OS to hibernation mode instead of shutting down.
Step 3
Disconnect the power supply cable from the mobile computer. Never remove the battery while the laptop is connected to AC power.
Step 4
Turn the laptop over. Do not place the computer cover on a hard surface. Explore the type of battery attachment. Newer laptop models use latches that can be easily pushed back with your fingers. Take this action. Remove the battery from the case.
Step 5
In relatively old mobile computers, the battery may be in a separate tray. Unscrew a few screws and remove the compartment cover. Remove the battery.
Step 6
Connect the power supply to your laptop, and then connect the adapter to AC power. Always follow this procedure in the order shown. This is especially important when working without a battery.
Step 7
Your computer is now ready to use. Remember that the battery of a mobile computer acts as a voltage stabilizer. Get an uninterruptible power supply. Connect your laptop to the network through this equipment.
Step 8
This approach will prevent damage to laptop controllers during sudden power surges. In addition, in the event of a power outage, you will be able to gracefully shut down the operating system and specific programs.
