Tricolor TV is a very popular satellite television in Russia. Usually, the equipment is connected and activated by a company specialist, but if you wish, you can do this on your own.
Instructions
Step 1
Assemble the antenna according to the attached instructions. Remember that the dish should be perpendicular to the ground at its maximum tilt angle, otherwise you probably installed it incorrectly.
Step 2
Attach the antenna for Tricolor TV, if possible, on the south side of the house, since the broadcast satellite is located 4 degrees to the left of the south. It is necessary to orient the antenna in the south direction exactly according to the compass, and then move it 4 degrees to the left. Secure in this position by orienting the plane perpendicular to the ground. Connect the receiver and the cymbal converter with a cable, attaching the latter with electrical tape to the base of the antenna and the converter holder so that it does not swing in the wind.
Step 3
Turn on the receiver and TV. Press the red button twice to the left of the central part of the remote control and wait for the adjustment scale with the parameters of the quality and signal strength to appear. If the scales remain empty, the dish cannot see the satellite. Adjust the plate properly with the help of another person. Let him at this moment be at the TV and tell you when the signal appears. Typically, this involves turning the antenna slightly to the right or left. The quality and strength should be at least 80 percent of the scale, which is a good result for comfortable TV viewing.
Step 4
Tune Tricolor TV channels. Press the "Menu" button, go to the "Channel Search" item. After finding the channels, save them. If you do not see any channels and the screen displays “Scrambled channel DRE”, it means that the receiver has not yet received the access keys from the satellite. Turn on some federal channel, for example, "First" and wait a little. After a while, all channels will start working. Adjust the picture quality and sound as appropriate.
