Installing RAM is one of the easiest ways to improve the speed and performance of your computer. At the same time, not only games and programs run faster, but the duration of loading the operating system is reduced significantly. You can add additional memory to your computer within minutes.
Instructions
Step 1
Determine how much memory is already installed. Go to the Start menu and select Settings, then Control Panel and System. Select the General tab. The amount of memory installed on your computer will be shown at the bottom of the page.
Step 2
Determine what type and amount of memory you need to purchase. Refer to your user manual for the maximum amount of memory your computer can handle. The guide will also help you choose the type and speed of memory you need. Buy RAM online or at your local computer store.
Step 3
Open the computer case. Refer to the instruction manual if necessary. Remove all metal rings, watches, or bracelets. Turn off the computer, unplug it from the electrical outlet, and then touch the metal chassis to discharge any static electricity. An antistatic wrist strap can also be used for this purpose.
Step 4
Locate the memory slots on the computer's motherboard. If necessary, refer to the instruction manual. If there are no free slots, you will have to remove one or more of the installed memory cards to be able to add new memory.
Step 5
Install new memory. To do this, open the holders in the free slot and carefully insert the memory card into it. Make sure the memory card module is securely inserted into the slot and secure the holders.
Step 6
Test the installed memory. Close the case and turn on the computer. If the computer starts beeping, then the memory is not installed correctly. Then repeat step 5 to make sure the memory is firmly seated in the slot. If the installation was successful, check that the system has detected a new amount of memory (step 1).
