Sooner or later, any laptop has to be disassembled. The reasons for this can be very different: repair or replacement of one of the parts, general diagnostics of the state of devices, or banal cleaning of the internals of a laptop from dust and debris. In terms of disassembly, HP notebooks are not much different from other representatives of similar devices.
Necessary
Phillips screwdrivers
Instructions
Step 1
Select the correct size Phillips screwdriver. You do not need flat screwdrivers for parsing. Please note that if you need to remove any part after disassembling the case, you will need small Phillips screwdrivers.
Step 2
Place a thick, soft cloth on top and place the laptop on top of it. This will avoid scratching the cover. If you need to remove a specific part, remove the screws holding the part cover. If your goal is to remove the entire case, then unscrew the extreme 4-6 screws responsible for securing the entire bottom wall.
Step 3
After removing the mounting screws, carefully lift the bottom wall. It should be removed effortlessly. If this does not happen, then you have not removed all the screws. You can safely remove the cover, because she no reason or trains are not brought to her.
Step 4
Before proceeding with the detachment of individual elements of the laptop, be sure to blow out or vacuum its insides. This will prevent important parts of the laptop from getting dirty during disassembly.
