The goal of overclocking a wireless router is to increase its coverage range and I / O speed. Wireless routers like the NETGEAR WNDR3300 are essentially mini computers equipped with a processor, little RAM, and an operating system. To overclock the WNDR3300, the operating system must be replaced with another one that is more user-friendly.
Instructions
Step 1
Download the overclocking program from the manufacturer's official website. If the required files are in the archive, unzip them to your desktop.
Step 2
Disconnect all other computers from the router. Disable wireless access. Enter a static IP address such as 192.168.1.8. Leave the subnet mask at 255.255.255.0.
Step 3
Perform a "hard reset" by holding the Reset button for 30 seconds. Unplug the router without releasing Reset for another 30 seconds. Turn on the router and hold Reset for another 30 seconds. The whole process takes 90 seconds.
Step 4
Install the firmware following the instructions. These may vary depending on the program you choose, but generally include opening the router's GUI, entering the router's IP address and entering a password ("0000" or "1234"), opening the interface, and overwriting the old firmware.
Step 5
Wait at least 3 minutes for the new firmware to restore the operating system. It is very important. When all the lights on the router turn on again, you can proceed with the operation.
Step 6
You will be prompted to sign in. Enter login "admin" and password ("0000" or "1234"). Here you can increase the clock speed up to a maximum of 251Mz.
Step 7
Perform a soft reboot after you change the router settings. Unplug the router and wait 30 seconds before plugging it back in.
