When overclocking a mobile computer, you need to be extremely careful. Changing the operating parameters of this device incorrectly may result in irreversible damage to certain devices.
It is necessary
Clock Gen
Instructions
Step 1
Start by configuring the CPU mode. Typically, the BIOS menu on mobile computers does not allow changing CPU settings, so use the Clock Gen program. Install this application and launch it. Move the slider to increase the CPU bus frequency. Click the Test button and verify that the processor is running smoothly.
Step 2
If you are using a version of the program that allows you to raise the voltage supplied to the CPU, then increase this figure by 0.1-0.2 Volts. Get optimal processor performance.
Step 3
Restart your laptop and open the BIOS menu. Go to the Advanced Setup menu and find the RAM settings. Increase the frequency of the RAM bus a little. This process is best done after you have finished configuring the processor mode.
Step 4
Adjust the power settings. The operating system can operate in a power saving mode to extend the life of the battery. Open Control Panel and select the "System and Security" menu. Open the item "Power supply". Select the plan you are using and click the "Configure advanced power settings" button.
Step 5
Find the item "Maximum processor state". Set to 99% for mains and battery operation. If you set it to a lower value, the processor will not work at full capacity. Find the "CPU Cooling Options" item and select the "Active Mode" option. This will provide high-quality cooling of the mobile computer.
Step 6
Remember that laptops run significantly faster when plugged into an electrical outlet. Use this feature when you need to get the best performance from your mobile computer. Check the temperature of the processor and graphics card to prevent overheating of these devices.
