We are often not satisfied with the power of our computer. One of the main parts of a computer is the processor. Of course, by overclocking it, we increase the power of the PC. There are many companies that produce processors. Overclocking methods may differ depending on its manufacturer.
It is necessary
Computer, internet access, pencil, zapon varnish, glue
Instructions
Step 1
If you have an Athlon model released earlier than 2004, there is a very simple way to improve its quality. We take a regular pencil with a lead of 0.3 or 0.5 mm. On the processor, we are looking for a row of golden dots labeled L1. It may seem that they are connected by a thread, but in fact, this thread has been cut. Now draw a line with a pencil in the place where it is not. As a result, you should get a continuous line of gold thread with graphite in the middle. In this way, connect all the contacts. Do not apply too much pressure on the pencil, you may damage the processor.
Step 2
If your processor is later than 2004, then you need to overclock it a little differently. Take the glue and carefully fill in the holes between the L1 pins. Never put glue on the pins themselves, this will ruin your processor. Let the glue dry. Remove any residual glue that did not get into the holes. Take a conductive lacquer pin and draw a line between the L1 pins in the same way as you did with a pencil. Follow these steps for each pair of contacts.
Step 3
Download a program that will increase the frequency at which the processor operates. To do this, find out the name of the motherboard, go to the sites that provide free utilities and select the appropriate program. Also download updated drivers for your motherboard. This can be done from the manufacturer's official website. Disable the processor frequency adjustment feature, if available. Run the program. Increase your CPU multiplier and frequency. Do not set the maximum settings, this can lead to burnout of the processor.
Step 4
Go to the BIOS of your computer and find the option responsible for the processor frequency. It can be in different sections and even have different names, so be sure to find a site on the Internet with a description of the BIOS for your motherboard. Move the arrow to the indicator and press Enter. Set the desired frequency, save your changes and restart your computer.
