To preserve the display of a mobile phone, camera, media player or any other mobile device, you can stick a special protective film on it. A thin layer of transparent plastic will protect the screen surface from scratches, abrasions and damage. Screen protectors can be matte, glossy or have a reflective mirror surface, but any of them will perform the main function - to protect the display.
Instructions
Step 1
In order to stick the film, you need to make sure that the shape of the film matches the shape of your device's display. Screen protectors can be made directly for the selected phone or player model, or they can be large, suitable for any mobile devices. If your film is larger than the screen, you should trim it to fit exactly the edge of the screen. To do this, a removable upper layer is applied to the film, on which you can draw the contours of the screen by attaching the film to the display. After you have drawn the outlines of the screen, carefully cut this part with scissors.
Step 2
Now you need to prepare the display surface. Wipe it thoroughly with the cloth, which is always included with the protective film. Try not to leave even a small crumb or divorce. After the surface of the screen is clean, cover it with a cloth.
Step 3
Take the tape and examine it. It usually has two transparent labels labeled Step 1 and Step 2. You need to peel off an additional layer from the film by pulling the Step 1 label and stick the film to the screen, smoothing it out and keeping air out of the film. Now, pulling on the Step 2 tab, remove the second additional layer from the film. Your screen is now protected.
