It is not difficult to reflash the phone with the installation of the Russified menu. To do this, you will need a properly embroidered cable and a special program that allows you to download the russified software to your phone.
Necessary
Cable, appropriate pinout, telephone plug, device driver, firmware program
Instructions
Step 1
Purchase or download a flashing program for your mobile phone from the developer's website. You can use FlashTool or Spiderman 2.61 Rus.
Step 2
Connect a computer and a mobile phone with a special USB flash cable with a COM port emulator. When turned on, the computer detects a new, unrecognized device, and then the Found New Hardware Wizard opens. Specify the full path to the corresponding device driver. In the device manager, select the desired COM port number, in the Properties tab, set the required speed.
Step 3
Launch FlashTool and configure it. To do this, go to Download Agent, then select the processor type of your mobile phone. Next, enter Options, in the Baudrate point, specify the speed of the firmware cable, which depends entirely on its chip.
Step 4
In the COM Port item, set the port number where the firmware cable is connected, and in the Operation Method, select NFB. Click the Read back and Add buttons in turn. Next, save the firmware file.
Step 5
In the window that appears, in the last field, enter the value 0x04000000 for 64 MB flash and 0x08000000 for 128 MB flash. Before downloading the firmware file, select the Read Page Only tab. This will allow the bin file to be opened with either FFME or MTK-RES V1.3.
Step 6
Turn off your phone. In the Action menu, go to Read back. Turn on your phone, wait for moving lanes to appear. Their blue color means that the flashing is in full swing.
