How To Install An Operating System On A USB Flash Drive

Table of contents:

How To Install An Operating System On A USB Flash Drive
How To Install An Operating System On A USB Flash Drive

Video: How To Install An Operating System On A USB Flash Drive

Video: How To Install An Operating System On A USB Flash Drive
Video: How to Download and Install Windows 10 from USB Flash Drive Step-By-Step 2024, December
Anonim

Installing the operating system on a USB flash drive can come in handy if problems arise with the CD / DVD drive. Many users have problems installing the operating system on removable media. This is usually due to a misunderstanding of general information. If you follow all the recommendations, then this operation can be carried out with extraordinary ease.

How to install an operating system on a USB flash drive
How to install an operating system on a USB flash drive

It is necessary

Program, PC

Instructions

Step 1

Before installing an operating system on a USB flash drive, it is advisable to download it on the Internet. It must be in an ISO image. Do not forget to find out the serial key that is needed to activate the operating system. You will need a flash drive with up to 4 GB of memory.

Step 2

The bootable flash card is created using the UltraISO program. Open this program, go to "File" - "Open". In the window that appears, indicate the location of the operating system on the computer. You will notice two halves in the program. At the top is the recordable image, and at the bottom is the location of the flash drive, which is usually the F drive.

Step 3

Click "Boot" and indicate "write an image of the hard disk". The image type must be Bootable. This will confirm that the image will be bootable. If you do not follow this rule, you will not be able to load the operating system on a laptop or computer later. Before recording, check the correctness of entering the data of the flash card. The recording method is selected by USB-HDD +. Before recording, you can select the "Format to NTFS" column. You can put a tick on the "Check" item. This will allow you to find errors. Then the recording itself begins. After the end of the recording, a window will appear in which the completion of the process will be reported.

Step 4

Images of the operating system are also created from the installation disc. This is done using the UltraISO program. The USB flash drive should be formatted only in NTFS. If you do this in FAT32, then the image will not be completely written to the USB flash drive.

In general, we can say that creating an image is not difficult.

Recommended: