Wireless headphones are gaining popularity every day. This is due to ease of use, quick and easy connection to devices and the absence of inconvenient wires. Connecting Bluetooth headphones to mobile devices is quite simple, however, to set up a connection between PCs, you need to perform a number of actions.
Connection via complete module
In this case, the connection will be made through a special adapter that comes with the headphones. It can look like a small case with a mini jack 3.5 mm plug, or a small device with a USB connector.
- The first thing to do is connect the adapter to your PC. If necessary, turn on the headphones, after which an indicator on one of the cups will light up, indicating a successful connection.
-
To create a connection between the device and the system, you need to go to the "Start" menu, then write "Bluetooth" in the search bar, then select the desired tab called "Add Bluetooth device".
Image -
After clicking on it, the "Add Device Wizard" window will open. At this stage, the pairing should be established between the gadgets. In most cases, this is done by holding down the headphone power button for a few seconds. If this method does not work, then you need to revise the instructions.
Image -
A new device should appear in the frame. You need to click on it and click on "Next".
Image -
Pairing is usually established in a few seconds. Upon completion, the "Wizard" will inform you that the device has been successfully added to the computer. It can be closed.
Image -
It remains to go to the "Control Panel" in the same "Start" window and go to "Devices and Printers".
Image -
Here you need to find the name of the connected device, right-click on it and select "Bluetooth Operations".
Image -
Next, an automatic search for services necessary for the normal operation of the device will begin.
Image -
After completing the operation, it remains to click on "Listen to music". If everything goes well, the message "Bluetooth connection established" will be displayed.
Image
Bluetooth
If a laptop or computer has built-in Bluetooth, then a USB connection is simply not needed. It remains only to activate it. It works differently on different operating systems. On Windows 10, just click on the icon in the lower right corner, after which a panel will open with the ability to enable this module.
If the connection fails, it may be due to outdated Bluetooth drivers. Updating them is extremely easy.
-
In the "Device Manager" tab below, under the icon, there will be an image of the module's logo with a yellow triangle.
Image -
You need to right-click on it and go to "Update Drivers".
Image -
You need to click on "Search automatically for updated drivers". After searching for new driver versions, the installation will begin, which takes about 10-20 minutes. Problems with connecting the headphones are likely to be resolved.
Image
