Music lovers strive to listen to music with the highest possible sound quality. To do this, you need to have good sound equipment, which costs a lot of money. However, you can use quite extraordinary solutions. For example, connect your car subwoofer to your computer and enjoy deep bass.
It is necessary
- - car subwoofer;
- - sound wires;
- - soldering iron;
- - computer power supply;
- - instruments;
- - wood for making a box;
- - cladding material.
Instructions
Step 1
Consider connecting your car subwoofer to your computer for listening to music at home. If you have a small apartment, then the installation of such a device in it is impractical, since the car audio has a very high volume. The glass in the apartment may simply not withstand the vibrations from the subwoofer and burst. Therefore, carefully read the characteristics of the subwoofer, and also calculate the area that the bass will cover.
Step 2
Purchase a power supply from any computer store. The fact is that a car subwoofer is designed to operate from 12 volts. Therefore, a power supply is needed that will convert 220 to 12 volts. Find out which subwoofer you have. They are active and passive. The difference lies in the fact that an amplifier is built into the active subwoofer, while the passive one does not. If you have a passive subwoofer, you will have to buy an amplifier. The sales assistant will help you to choose the right one. Just tell him your subwoofer model. Also find out which sound card is installed in your computer. It must have tulip connectors. This will maximize the sound quality. For an active subwoofer, a conventional mini-jack is enough.
Step 3
Take care of the subwoofer enclosure. You can make a new wooden case yourself and cover it with some material. Install the power supply inside. In this case, be sure to carefully secure it so that it does not emit extraneous sounds during vibration. The amplifier can be bolted onto the back of the box. Next, connect the amplifier to computers through the cinch connectors. Connect the subwoofer to the amplifier outputs. If the subwoofer is active, then you need to connect it directly to the computer via a "mini-jack". Turn on the power supply. Check the functionality of the assembled structure and enjoy the music.
