Printer owners are familiar with the situation when during the printing of important documents or photos, the cartridge unexpectedly runs out. Running to the store is not always possible, and keeping a large supply of cartridges at home is also not an option. You can refill the cartridge!
Instructions
Step 1
All inkjet printers, or rather their cartridges, can be refilled with special inks after they run out of ink filled in them at the factory. And you can refuel them, and even need to, since it is many times cheaper than buying a new cartridge, and the print quality does not suffer, of course, if you bought high-quality ink. However, the cost of the most expensive refill ink will be several times lower than the cost of the original cartridge. So the choice is clear.
The design features of each cartridge may differ, but the principle of operation and the mechanism for refilling them with ink will remain unchanged. Therefore, let's consider the basic principle of refilling inkjet cartridges.
Step 2
First of all, you should go to a store that sells computer equipment and accessories to buy ink for your inkjet printer model. Having bought the necessary ink, which is a set of three syringes of different colors (in other cases it can be tubes with ink and syringes for refueling), you can start refueling.
Step 3
After opening the printer cover, remove the cartridge, place it on a tissue paper and peel off the sticker that is located on the top of the cartridge. Under the sticker, you will find three holes, the color of the insides of which will be different from each other, so you will not be able to mix up the colors. Just in case, you can make sure of the correctness by reading the instructions that come with the ink set. Pour ink of the desired color into these holes very slowly - usually no more than 2 ml in each hole, seal the holes with a sticker, and let the cartridge stand for a few minutes. After that, you need to remove the ink droplets from the bottom of the cartridge and insert the cartridge into place.
Step 4
The final step will be to launch the cartridge cleaning program, which is part of the software for your printer model.
