Wireless headphones are used more and more among people. The absence of uncomfortable wires and at the same time a good connection are ideally combined with each other. However, in some cases, headphones are required to be used in conjunction with a PC. In this case, it will be more difficult to carry out a connection than with a telephone.
Bluetooth presence
Unfortunately, not all devices have built-in Bluetooth. To check for the presence of the required program, you must simultaneously hold down the Windows and R buttons. The command execution window will pop up. You need to enter a line, and then click on "OK" or Enter.
Different headphones support different versions of Blue Tooth. It is easy to view the version of the application - you need to right-click on the second line. Next, a plate with the necessary information will appear.
If the program is still missing, then it can be easily downloaded from the developer's official website. Installation is possible for a wide variety of operating systems, and the process itself is extremely fast.
Activation and communication
Bluetooth is easy to activate. You need to click on "Start", click on the gear and go to the "Devices" tab in the window that opens.
In the "Devices" table, it remains to select "Bluetooth", and then turn it on using the blue checkbox.
The designation of the running program will appear in the lower right corner. To establish a wireless connection with the headphones, you must click on "Add new connection" or "Add Bluetooth devices" - depending on the operating system.
At this point, the headphones should be turned on. When the computer displays all the devices found, then you need to select the name of the device and click on it. Pairing starts. If successful, the word "Paired" will be displayed in the "Parameters" window.
Popular Issues
If music continues to play on the speaker, then it might be worth switching devices manually. This can be done in just a few clicks - first click on the "Start" button, and then go to the "Control Panel". Further, depending on the version of the operating system, you need to go to the sound settings. You just need to find the speaker icon and double-click on it.
The settings menu will open. You need to select "Play".
All devices that the PC can interact with will be available here. If the sound comes from any other device except the desired one, then you should double-click on "Headphones", and then click "OK".
If the audio still does not play in them, then it is recommended to restart the computer and repeat the whole process again.
If there is no sound at all, then you just need to open the mishker by clicking on the volume icon in the lower left corner with the right mouse button, and if the value is 0% by default, then increase it to the desired volume.
If the signal does not pick up well, then most likely the problem is in the Bluetooth drivers, and all that is needed is to click on the "Update device configuration" or "Update drivers" button. Updates will take place quickly and automatically with the presence of the Internet.
