The keyboard of a laptop is almost identical to the keyboard used on a personal computer. The same buttons, the same key sequence, the same principle of attaching the buttons to the base. You do not need to be a computer expert to insert a button in a laptop, these actions are quite simple.
It is necessary
Laptop, button, paper clip
Instructions
Step 1
Before considering the process of installing a button on a laptop, you should talk about how to remove this very button. That is, the procedure for replacing keys on a laptop will be considered from the very beginning. So, what needs to be done to replace a button on a laptop keyboard.
Step 2
Removing the keys. If on a standard keyboard of a personal computer this operation takes place without complications (the key is simply grasped on both sides and is extracted with intensive movements to the sides), then when removing the key from the laptop, the user should be more careful. Here, chances are good that you will damage one of the button mounts. In the future, this defect will spoil your mood when working with a laptop.
Step 3
To remove the key from the base, you need to proceed as follows. Find a paper clip and unfold it. Pass a paperclip under the bottom of the key, then pull it towards you. This should be done very carefully. In most cases, the key lends itself easily to and is removed from the base. If you need to remove several keys, do the same for each of them. It should be noted that before removing the buttons, you must write down their location on a piece of paper. This will help you assemble the keyboard in the correct way in the future.
Step 4
Installing a key on a laptop does not require the user to be careful about removing the keys. However, you should be extremely careful. To install the button on the laptop, give it the correct location. Once the key is in place, press it down against the platform with a light finger pressure. The button will be secured with plastic fasteners.
