Over time, the glossy parts of the laptop wear off and begin to look, to put it mildly, unpresentable. To give your laptop a "second life", you can paint it, and then it will regain its original appearance.
Necessary
paint (automobile or any other), sandpaper, screwdriver, colorless varnish
Instructions
Step 1
Prepare your laptop before painting. To begin with, it must be completely disassembled so that the paint does not get on important elements. A diagram for disassembling a laptop should be in the instruction manual or on the manufacturer's official website. As a rule, the lid and the plastic cover near the keyboard are painted. they are most susceptible to paint damage and chipping.
Step 2
Then sand the coating to be painted with sandpaper. Don't try too hard, just remove some polish and scratches. It is better to skin in water or periodically wet the surface with it.
Step 3
After sanding, all parts should be rinsed and degreased for a more even paint application and to avoid bubbles. Then the surfaces are evenly primed, after which the soil should be allowed to dry completely (in apartment conditions it will take about a day).
Step 4
Next, the first thin layer of paint is applied. Car paint works best, but you can use any paint you like. After complete drying, the next layer is applied.
Step 5
After the paint has dried, the first layer of varnish is applied in the same way, then (after about 24 hours) - the second. Then the laptop is dried again. After checking all the painted parts, you can safely assemble it. Unpainted parts can be polished for a better effect. Painting finished.
