Most modern mobile computers are equipped with a built-in video capture device. Before you start working with your webcam, you need to properly configure this equipment.
It is necessary
Access to the Internet
Instructions
Step 1
First, select the drivers for the built-in web camera. Their presence will ensure stable and correct operation of the device. Download the required files from the mobile developer site. Typically, links to this software are located in the Download Center menu.
Step 2
Be very careful when filling out the proposed form. Download exactly the files that are designed to work with this laptop model.
Step 3
Install the downloaded drivers. To do this, launch the application file or use the "Device Manager" menu.
Step 4
If you used the second method, make sure the webcam is turned on. Otherwise, press the desired key combination to activate this device.
Step 5
Install the program with which you will work with the video capture device. It can be one of the popular instant messengers or any other utility that does not require an Internet connection.
Step 6
Activate the webcam and open the installed program. Visually evaluate the image transmitted to the monitor. Change the following camera characteristics: saturation, contrast, white balance, brightness, sharpness. Activate automatic light level detection.
Step 7
Check the quality of the microphone. If you prefer to use the built-in device, adjust the signal level. To do this, open your computer's control panel.
Step 8
Select the Manage Sound Devices menu. Click on the "Communication" link and select the built-in microphone. Open the properties of this device by clicking the corresponding button.
Step 9
In the next window, select the "Levels" tab. Adjust the sensitivity level of the microphone. Activate the Gain parameter if necessary.
