Random access memory is a very important indicator of a computer. The speed of work without freezing of many applications and the system, in general, depends on its quantity. To resolve the issue of increasing the amount of RAM, you need to turn to RAM. Random access memory - a device (module) for implementing the functions of random access memory. That is, these are the planks that are called "operative" in everyday life.
It is necessary
- - a computer
- - RAM strips
Instructions
Step 1
To increase the computer's RAM, we will use new RAM strips. Indeed, this is the only way to increase memory. Using "overclocking" techniques can lead to system or module crash ", especially if" overclocking "is performed by an amateur. Programs that increase memory actually optimize it by disabling certain features and services. Therefore, first of all, you need to determine which RAM bar is right for you. There are several types of them: DIMM, DDR, DDR2, DDR3. Find out exactly which one is right for you, otherwise your computer may break down if you install the wrong bracket.
Step 2
After you have purchased the necessary strip, which can increase the required number of megabytes for memory, you can proceed with the installation. We open the lid of the computer. Disconnect all plugs from it beforehand. First of all, the plug is responsible for the consumption of energy from the network. Examine the "insides" of your computer. Now find the slot that is responsible for the RAM. These slots are usually located to the right of the processor.
Step 3
Carefully insert (or replace) the RAM bar into the slot. Special holders, which are located at the top and bottom, should make a characteristic click. Then, close the computer cover and connect the plugs. Turn on your computer. You may need to reinstall your system. Right click on the shortcut "My Computer", select "Properties." In the window that opens, make sure that the amount of RAM is increased.
