When creating a local network, it is important to consider the possibility of adding new devices to it. To include a new computer in the network, it is necessary to correctly configure not only the corresponding adapter, but also the security settings of this PC.
Necessary
network cable
Instructions
Step 1
Connect your computer to your network equipment. This could be a network hub or router. Within a small office, a direct connection of two computers can be used. This will improve the security of the data stored on the new PC.
Step 2
Turn on your computer. Wait a while for the operating system to finish loading. After defining a new local connection, a corresponding message will appear. For Windows 7, select your network type from the available options.
Step 3
Do not specify the type "Home network" if you are not sure about the reliability of all users who have access to network computers.
Step 4
Open the Network and Sharing Center menu. Go to the item "Changing adapter parameters" by clicking on the link of the same name.
Step 5
Open the properties of the new network connection. Find the "Internet Protocol TCP / IPv4" field and go to the advanced options menu. Further configuration depends on the type of equipment used to create your network.
Step 6
If you are using a hub, set the IP address to a static value. It is better to use an address that will satisfy the required range. Those. all computers must have IP addresses of a certain format, for example 115.10.10. X.
Step 7
Perhaps one of the networked computers acts as an Internet access server. Enter the IP address of the network card of this PC in the "Preferred DNS Server" field.
Step 8
In the event that the network is built using a router, just activate the "Obtain an IP address automatically" item.
Step 9
After completing the steps described, open Windows Firewall and set permissions for specific connections. Check for public directories on the new computer. Turn off sharing for personal or sensitive data.
