The procedure for resetting the communicator, or Hard Reset, is a standard operation provided by all manufacturers. Please note that restoring factory settings means completely deleting all user information.
Instructions
Step 1
The methods for performing Hard Reset are more or less the same for all communicators, but the use of the buttons may differ for different models, even of the same manufacturer.
Step 2
For communicators Acer models c510, c530, c531, you must simultaneously press the top two buttons and the Reset button. For models n300, n311, n321 - press the Today key and the Message key. Hold the keys down and press Reset with the stylus.
Step 3
In models P525, P526, P527, P535, P550, P552w and P570 Asus communicators, you need to hold down the scroll wheel up and press Reset for three seconds. Release Reset and wait for the prompt to press the call answer button to reset the device. Click this button.
Step 4
Press and hold the Power and Reset buttons on BenQ Communicator P50 and P51 at the same time for five seconds. After that, you need to release the Reset, continuing to hold down the Power button for another five seconds.
Step 5
A similar scheme is used in the Eten / Glowfish communicators of the G500, G500 +, M600 and M600 + models. Use the Power and Reset keys simultaneously for five seconds. But after that you need to press the end call button and wait for the system request to appear. Press and hold the "Yes" button.
Step 6
To reset the Fujitsu Siemens communicators n500, n520, n560 and c550, press the Power and Calendar buttons at the same time. Hold them in this position and press the Reset stylus once at the bottom of the phone with the stylus. Continue holding the Power and Calendar buttons for another ten seconds.
Step 7
For communicators Gigabyte GSmart models i120, i128, i300, i350, T600 and MW998, press and hold the Power button until the mobile device turns off. Press the Win and OK keys at the same time and press the Power button again.
Step 8
Press the 6 button to hard reset your HP Voice Messenger Communicator. Hold this button down and turn on your mobile device. Wait for the message on the device to be reset to zero and release the button 6.
