A high-quality cooling system is necessary for the stable operation of important elements of a personal computer. Improving the cooling of devices is recommended in cases where their temperature exceeds the recommended standards.
Necessary
- - fans;
- - crosshead screwdriver.
Instructions
Step 1
Start by cleaning the cooling fans installed inside the system unit. Unplug the power cord from the computer. Open the case of the system unit by removing its left wall.
Step 2
Remove all coolers, having previously disconnected the necessary loops. Soak cotton pads in a mild alcohol solution and wipe down the fan blades. It is worth noting that these manipulations will allow the devices to work with their original power.
Step 3
If you need to significantly improve the cooling quality of your computer, purchase other fans. New coolers should be more powerful than their counterparts.
Step 4
The main characteristic of the fans is the rotation speed of the blades. Naturally, a cooler with a small diameter must rotate much faster to ensure good cooling. Consider this feature when choosing new fans.
Step 5
Before installing new coolers, be sure to clean the radiators from dust. In modern computers, these elements are installed on the central processor and are present in the design of video adapters.
Step 6
Don't forget to dust off your computer's power supply. Check for the correct fans on the back of the system unit. Ideally, two large coolers should be installed there.
Step 7
Position the fans so that their blades rotate in opposite directions. This will ensure stable air convection between the outside and the inside of the enclosure.
Step 8
Remember that fans are not designed to cool the air. Do not install the system unit in the immediate vicinity of heating elements. Clean the ventilation openings in a timely manner. Install "water" cooling if conventional coolers do not cope with the task.
