To enter the keys into the satellite receiver, you must have an emulator program, if it is not there, then viewing the encoded channels is impossible. This action has recently become quite irrelevant due to the change in the security policy of satellite TV service providers.
Necessary
- - Internet connection;
- - null modem cable;
- - flash card.
Instructions
Step 1
Turn on the service menu of your receiver, and then find the emulator program. It has a special line for entering keys using the remote control. Keys are easy enough to find on the Internet, in addition, many receivers support the function of their automatic update.
Step 2
Please note that this action in most cases violates the terms of the contract for the provision of satellite television services to you and may entail certain consequences.
Step 3
If your receiver does not have an emulator program, install it by updating the software using one of the possible methods supported by your model.
Step 4
To do this, download one of the latest stable versions of the firmware from the manufacturer's website or other resource, having previously read the reviews of the users who installed this software.
Step 5
Choose the method of flashing - using a null-modem cable and a computer, or updating via a removable storage device. The second method is much faster, since it does not require additional program settings for flashing.
Step 6
In case of flashing the receiver from a computer, connect the devices using a cable, and then download the program for flashing your device model. Run it and specify the connection port, having previously selected the operating system update mode.
Step 7
Complete the remaining settings and then proceed with the update. It is best to use an uninterruptible power supply during this procedure. Also, be sure to read the attached instructions.
Step 8
If you decide to interrogate the receiver from a USB flash drive, format it, then copy the software update to the memory.
Step 9
Insert it into the receiver and select the update mode in the service menu, specify your removable drive in the equipment, wait until the flashing operation is completed. In some cases, after this, the receiver must be de-energized; read more in the instructions of the program or service manual of the device.
