How To Upgrade A Laptop

Table of contents:

How To Upgrade A Laptop
How To Upgrade A Laptop

Video: How To Upgrade A Laptop

Video: How To Upgrade A Laptop
Video: What Options Are There for Laptop Upgrades? 2024, November
Anonim

Today, the popularity of laptops is growing steadily. They are comfortable, not bulky and you can take them with you wherever you go. There are many laptop models. Some are better, others have slightly worse characteristics. But the laptop can be pumped, that is, a number of procedures can be carried out that will improve its work.

How to upgrade a laptop
How to upgrade a laptop

Necessary

Laptop, thin screwdriver

Instructions

Step 1

Before you start pumping your laptop, pay attention to what kind of connectors you should have on the parts, the amount of memory on the disk in order to avoid errors. You can add RAM. Turn your laptop upside down. You will see the caps that are screwed on Any hardware node can, in principle, be replaced, except for the video card and motherboard. Open the cover that stores the RAM underneath. It is marked with the "chip" sign.

Step 2

Open the cover with a screwdriver. You need to set the bar on memory. Press the clamps from different sides with a screwdriver, but you can also use your fingers. You will notice that the bar is accessible. Gently take it out with your hands and place the other. You can just shove the second RAM into the adjacent slot, which will be empty. This is how you replaced the RAM. Close the cover back. Now turn on your laptop and enter BIOS. To do this, press the "F2" key on the keyboard. Save the settings seen on the monitor and exit the BIOS.

Step 3

Now you can start replacing the hard drive. It is also located under the lid, which you will need to open. The icon indicating that the hard drive is stored there is represented by a barrel. You will also notice a grill on the lid that keeps your laptop from overheating. Open the cover. You will see that the hard drive is mounted on special mounts. To reach it, pull on it with your hand. Turn the mounts over and you will see a disc there. Unscrew the existing four bolts. The disk will be released. Next, pull it out and insert the other that you have prepared. Return the mounts back to their place. Close the lid and turn on the laptop. Go to BIOS again. Opposite the word Hard Disk, the disk that you installed will be displayed. This suggests that everything was done correctly. So quickly you pumped your laptop. Now it has become more powerful and its characteristics have been improved.

Recommended: