The most common need for zeroing in printers is the so-called diaper reset. This is a special sump where waste ink is drained when cleaning the nozzles of inkjet printers. Resetting the Epson printer is not difficult at all; you should use a special program.
Instructions
Step 1
Periodically, the pallet overflows, and the printer stops working, and the panel prompts you to contact the service center for maintenance and / or replacement of some parts. For Epson inkjet printers, there is a special program that allows you to perform this operation, and also has a number of useful functions and is distributed free of charge via the Internet.
Step 2
The program is called SSC Service Utility, and it will help you in a number of ways. You need to reset or reflash any chips, for which additional devices are used. You want to freeze ("freeze") the ink counters built into the cartridges. You can also individually clean the black and white and color heads of any Epson inkjet printer using the Force Clean Mode. Another possibility is to reset the counter of the discharged ink (the same "diaper"), even if it is already full.
Step 3
The program supports over 100 different Epson models and works with Windows 95/98 / ME / 2K2 / XP. Be sure to read the Help menu before using it.
Step 4
Replacing the diaper and resetting its counter are usually carried out at service centers, which is a paid service. The need for this operation arises periodically, when filling the diaper, when the printer stops working and requires service at the service center. With the help of the specified program, you can reset the printer counter yourself, but you should not do this constantly without replacing the diaper or pumping out ink from it, because it will overflow over time so that it starts leaking.
Step 5
To avoid going to the service center, each time you reset the ink drain counter, you need to take out and dry the diaper, or organize a constant drain of ink from it. Smart actions can save you time and focus on quality images.
