There are many programs for recording information on optical discs. But not all of them are as popular as the Nero program. Thanks to its intuitive interface, high reliability and simplicity, today it is Nero that is one of the most popular programs for burning discs. If you have not dealt with recording information on discs, it is recommended to start with it.
Necessary
- - Computer;
- - DVD disc;
- - Nero 6 program.
Instructions
Step 1
Insert a blank DVD or DVD RW disc into the drive. Run the program. At the top in the middle of the window, click on the arrow and select the format of the disks with which you will work. In this case, it is DVD, but you can also select CD / DVD. Now go to the Favorites tab and select Create Data DVD. The program should automatically detect the type of media that is in the drive.
Step 2
You can check which disk type is selected by the system. There is an arrow in the lower right corner. Information about the type of disc is written next to it. If the system has incorrectly determined the type of DVD, then click on the arrow and select the correct disc format. Although it is very rare for the program to correctly identify the disc, this can happen if you use the DVD 9 disc format for recording.
Step 3
Now, in the upper right corner, click the Add button and add the files to the project that you want to burn to the optical disc. Each time you add a file, a bar at the bottom of the window shows the remaining free disk space. If the bar turns red, the added files are larger than the disc capacity in the drive. In this case, the disc will simply not be written, and you will have to delete some of the files. When all the files are added, in the program window, click "Next".
Step 4
The final settings window will appear. Here in the line "Name" you can specify the name of the disc. Click the arrow next to Write Speed and select Maximum. You can also check the item "Check data after recording". When you select this function, the program will compare the data already recorded with the original data saved on the hard disk. After all the parameters are selected, click "Record". The process of recording the disc will begin, the speed of which depends on its type, the type of data that is written to it, as well as on the speed level that was set by the program. When the disc is burned, you will receive a notification that the burning has been completed successfully.
