How To Turn On Your Computer If You Forgot Your Password

Table of contents:

How To Turn On Your Computer If You Forgot Your Password
How To Turn On Your Computer If You Forgot Your Password

Video: How To Turn On Your Computer If You Forgot Your Password

Video: How To Turn On Your Computer If You Forgot Your Password
Video: How to reset password windows 10 If you forget it - Easy 2024, December
Anonim

Users of personal computers sometimes use a very large number of very different passwords. And also very often these passwords are forgotten. It happens that the passwords that provide access to the computer are forgotten. Fortunately, it is sometimes possible to log into a computer without reinstalling the operating system, which was extremely frustrating. This can be done when your computer is password protected by the BIOS. Let's consider. How can you remove this password without affecting the operating system.

Sometimes it is possible to access the PC without reinstalling the operating system
Sometimes it is possible to access the PC without reinstalling the operating system

It is necessary

BIOS is one of the most popular passwords designed to protect your computer from unauthorized interference. You may need a thin, regular screwdriver to remove it

Instructions

Step 1

"Geographically" BIOS settings are located in the CMOS memory. In order to reset the CMOS memory, you need to physically turn off the computer and put a jumper that will close the jumper contacts.

Step 2

Then turn on your computer. You will see that there will be no download, but the CMOS settings will be reset to zero.

Step 3

Then remove the jumper and turn on your computer again. Your monitor will ask you to press the F1 key. This is necessary in order to make the setting of BIOS parameters.

Step 4

If the default settings are fine for you - press the F1 key, in the BIOS menu, click on the "Save and exit" button. After this action, your computer will boot completely. If you want to set your own settings, do it, and after this installation click on the "Save and exit" button.

Recommended: