When writing data to DVD, sometimes problems occur that prevent normal operation of the disc. But what are they connected with and what are their reasons? Let's take a closer look at this issue.
Many PC users face such a problem as an error when writing information to a DVD disc. Often times, DVD discs cannot be burned because they are damaged or not designed for recording. Check the label on the disc so that you can write information on it, the label should be “DVD-R or DVD-RW”. Also carefully inspect the disc for cracks, scratches, chips and other defects. If there are obvious physical damage, then the disk will have to be replaced.
Another reason can be contamination of the optical surface of the disc. In order to clean it, you need to purchase special soft wipes for optical discs. Wipe the disc from center to edge.
The disc drive can also cause the disc to be unable to be written. First, make sure your drive is capable of burning DVDs. To do this, look at its front part there should be an inscription "DVD-RW or DVD + RW disk". It may turn out that the drive itself is in a malfunctioning state (the power of the laser of the writing head has dropped, the laser of the writing head is dirty).
To clean the laser head from dirt, you need to use a special cleaning disc, which can be bought at any computer store. If, after cleaning the laser, you still cannot write a disc, then you need to check the writing head. This operation is performed by the specialists of the service center. If they confirm this forecast, then there is only one way out - replacing the drive.
The software used to burn the disc can also be the cause. Please note that you will not be able to burn a DVD disc using standard tools of your operating system. To burn a DVD, use a dedicated software program.
