If you have ever purchased or used a Bluetooth headset, then you probably thought about the fact of connecting this device not only to a phone or MP3 player, but also to a computer. This connection will not cause you any difficulties, because the headset can be connected to a computer via a Bluetooth adapter. Read how to do this below.
It is necessary
Bluetooth headset, Bluetooth adapter, computer, installation CD with Bluetooth Soleil software
Instructions
Step 1
If you haven't installed the drivers for your Bluetooth adapter yet, do so now. Connect the adapter to your computer via the USB connector. There are such Bluetooth adapters that do not require additional drivers, but are installed directly when connected to a computer.
Step 2
Install the Bluetooth Soleil software. This program is usually found on the installation disc. If it was not there or such a disk is not available, you can download it from the Internet.
Step 3
Run the program. Turn on your headset. Pairing mode connection starts.
Step 4
In the program window that opens, select the Bluetooth Setup Wizard item.
Step 5
From the drop-down list, select the item I want to find a specific Bluetooth devise. Click the Next button.
Step 6
Bluetooth will start searching for all available devices. Check if the Bluetooth headset is out of Pairing mode. If it did, then reconnect it to this mode.
Step 7
As soon as the headset appears on the screen, click on it 2 times with the left mouse button.
Step 8
A menu will appear in front of you. At the bottom you will see the "Pin Code" field.
Step 9
Enter the Pin-code to connect to the headset ("0000" or "1234", or any number). After that, click the button opposite the Initiate Paring item.
Step 10
If everything has been done correctly up to this point, then all the services of the headset will appear. If there are several such services, then check the boxes in front of all the items. Click the Finish button.
Step 11
Press the Answer button on your headset. There is also the possibility of an alternative connection: right-click on the Bluetooth connection icon in the tray - then click Quick connect -Head Set - "Headset".
Step 12
In order to disconnect your headset from the computer, you must click on the "Answer" button.
