Turning on the power supply is one of those simple tasks that anyone can do. However, it is important to take into account the features of the device for its normal operation.
It is necessary
screwdriver
Instructions
Step 1
Open the computer cover and place the power supply on the top of the back of the computer. Secure the position with the special bolts that come with the device. Make sure that the system unit is firmly held in place, as falling of such a heavy device can damage other components.
Step 2
Connect the power wires to the corresponding connector on the motherboard, which is usually in the middle. Insert the cables into the disk drives and connect the wires of the power button and cooler. Make sure that the power wires are correctly connected to the front bottom panel of the motherboard, for this it is best to use the special instructions for your particular model. Be sure to observe the polarity. Connect the second cooler, if there is one in the computer configuration.
Step 3
On the back cover of the power supply, find a special connector for connecting the power cord. Connect the wire carefully and insert the plug into the outlet. Find the switch, if one is present in your model of the power supply, and put it in the On position. Do not confuse it with a voltage switch, as this can completely break your computer, not to mention the power supply will burn out and will not be recoverable in the future.
Step 4
Turn on your computer. If everything starts and works properly, close the lid of the system unit and secure it with special bolts. If you need to disconnect the power supply for any reason, first shut down the computer, saving all data, then turn it off using the switch or completely disconnect from the mains by unplugging the power cord. Never unplug your computer while it is running. This could damage the power supply.
