Overclocking a computer is a change in the operating mode of PC elements to improve the overall efficiency of the system. However, not everyone understands that such a procedure requires adherence to a clear sequence of actions. To carry out this operation, you need to adhere to certain rules.
It is necessary
PC, cooler
Instructions
Step 1
Overclocking is understood as increasing the speed of computer fragments due to their operation in abnormal operating modes. You need to enable automatic control of the cooler. Find the AutoFanSpeedControl parameter on the “Registry” tab of the program, and in the “RivaTuner Fan” branch. Set it to “3”.
Step 2
Quit RivaTuner.
Step 3
Close the utility window by clicking the "OK" button with the left mouse button. If you have configured the option "minimize to tray when closing", find the program icon in the tray.
Step 4
Right click on the RivaTuner menu, select “Exit”.
Step 5
Start the program again.
Step 6
Find the triangle on the Home tab.
Step 7
Click on it with the left mouse button and select the "Low-level system settings" sign in the list that appears.
Step 8
Click on it with the left mouse button.
Step 9
A window will appear in response. Check the "Enable low-level cooler control" checkbox.
Step 10
A small window asking "Restart Recommended" appeared. Click the "Define" button.
Step 11
Check if the cooler rpm control will work.
Step 12
Select the "Constant" mode, and set the slider to 100 rpm to hear the fan noise.
Step 13
Left-click the "Apply" button. If noise is heard, then try returning the mode to default.
Step 14
If the cooler of the video card did not react either to an increase in turbine speed or to a decrease in it, then it is better to uncheck the "Enable low-level cooler control" checkbox.
Step 15
Left-click the "OK" button and don't mess with this mode anymore.
Step 16
You can try fan control via driver-level profiles.
Step 17
If all is well (video card and cooler are controllable), start adjusting the low-level mode in automatic mode.
Step 18
Select the "Auto" mode and start going through the combinations with numbers, as this is where all the fun happens.
Step 19
At the end of these settings, left-click the "Apply" button, then left-click the "Save" button.
Step 20
Check the box “Load settings with Windows”.
21
Next, check the "Restore settings after sleep mode" checkbox. And once again click the "Apply" button with the left mouse button.