Now many are thinking about how to improve the cooling of their computer and reduce the noise level. One of the best options in this case is the water cooling system. The only thing that stops is the price. Therefore, it is better to do it yourself.
Necessary
- - pump;
- - heat exchanger;
- - cooling heads;
- - fan and casing;
- - tubes;
- - storage tank.
Instructions
Step 1
Purchase cooling heads to start building your water cooling system. To get started, choose the right head, based on your financial capabilities. Pay attention to the material - it is better to buy copper heads. If you need to prepare a cooling system for a video card, take two heads. Purchase them on sites https://www.dangerdenstore.com/home.php,
Step 2
Select a pump to build a water cooling system. It is better to choose a linear pump with the ability to connect power to it from a computer power supply. Also make sure the pump has a strong hydrostatic head - it is reliable and can provide a good flow rate. Install the gasket between the casing and the pump. Next, connect the heat exchanger - this is a coil that is designed to remove heat from the liquid. In function, it resembles a car radiator. Of course, you cannot use it to design a water cooling system, but there are craftsmen who use the core of the heater. Clean it out and replace the tubes.
Step 3
Construct the casing - this can be done using a sheet of metal or cardboard. Attach the fans to it, connect the shroud to the radiator with tape. The greater the distance between the surface of the heatsink and the fans, the better. A simple container can be used as a reservoir, where there is a cover for filling liquid, inlet and outlet nozzles. You can also make a closed cycle - for this you need to use a submersible pump located in a tank with a liquid. Connect the inlet to the tube. Add refrigerant to the water. You can use its automotive version to create a water cooling system with your own hands.
Step 4
Allow the water cycle to run for a few hours outside the computer - this will make it easier for you to detect leaks from the system, wrap all connections with wipes so that liquid does not get onto the system components.
