Changing the parameters of the CPU is a very important step in speeding up your computer. It is important to understand that incorrect settings can lead not only to malfunction of some devices, but also to their damage.
Necessary
- - CPU-Z;
- - Clock Gen.
Instructions
Step 1
Before proceeding with the configuration of the central processor, install the CPU-Z program. Its main function is to provide information about the current state of the CPU. Run this application and make sure the processor is stable.
Step 2
Now restart your computer and enter the BIOS menu. Press F1 and Ctrl at the same time to open the Advanced Setup menu. Usually, this is where the settings for the CPU and RAM settings are located. Find the item responsible for the CPU bus frequency. Increase this frequency by 10-20 Hertz. Now be sure to turn up the voltage supplied to the CPU. It is recommended to increase it by no more than 0.1 volts at a time.
Step 3
Press the F10 key. Wait for the loading of the operating system to complete. Check the stability of the CPU with the CPU-Z utility. If the program does not reveal any errors, then repeat the procedure to increase the CPU bus frequency and voltage. After raising the frequency to the maximum bar, increase the processor multiplier. Naturally, increase the voltage at the same time.
Step 4
If you were unable to change the parameters of the CPU through the BIOS menu, then download the GlockGen utility. Please note that there are several versions of the program, each of which is designed for a specific version of the motherboard. Run the installed application.
Step 5
Now increase the bus voltage and frequency by moving the corresponding sliders. Press the Test button before applying the selected parameters. Make sure the central processing unit is working properly. Monitor the temperature sensor readings at all times. If the temperature exceeds the permissible level even in passive mode, it is better to reduce the bus frequency and the multiplier. Otherwise, you risk corrupting the CPU.
