A computer is a device that works continuously. As a result, dust builds up in the computer case, which can cause electrostatic discharge and burn the device. Besides, getting dust on the cooler can impair its cooling properties. The process of cleaning a computer with a vacuum cleaner is not too complicated, but it has some subtleties.
Instructions
Step 1
First, open the lid of the computer case. There are two ways to vacuum your computer. The first method is shallow cleaning. This requires a vacuum cleaner that has a reverse air exhaust mode. It is necessary to carry out such a process on the balcony. The dust contained in the computer case can cause allergic reactions, therefore it is not recommended to vacuum in a closed and unventilated area.
Step 2
After taking out the case to the balcony, turn on the vacuum cleaner. Using the mode that will blow out air, start cleaning the computer. Set the required power. It should be exactly what is required for blowing out the dust. Without touching any part of the computer, start vacuuming the computer. First of all, start the process of removing dust from the coolers. Then work your way from top to bottom through the details of the computer.
Step 3
The second method is to completely clean the computer. To do this, disconnect all parts of the computer. Now start vacuuming each one. Vacuum the cabinet separately. This method will be able to provide a more complete disposal of dust than the first. Do not touch the computer with the vacuum tube. You can use a special nozzle that will be narrower than the tube of the vacuum cleaner. It will provide a higher pressure to purge the computer parts.
