Sound is not always played automatically when speakers are connected to a computer. In some cases, certain settings must be made for sound transmission.
It is necessary
Computer, speakers
Instructions
Step 1
It should be noted right away that before connecting, you must install audio drivers on your PC (if they were not installed by you earlier). To do this, take the appropriate disc (included with the kit when purchasing a computer) and install the software. After installation, restart your computer. Now you can move on to setting up the sound.
Step 2
Connecting speakers to a computer. On the back of the PC, you will see a sector equipped with round multi-colored holes. Insert the plugs into these holes so that the color of the plug matches the color of the hole. When connecting devices, a dialog box will open on the computer desktop, where you need to set the desired parameters ("Front speakers" or "Rear speakers").
Step 3
Connecting speakers with a subwoofer. In this case, only one plug is connected to the computer, the speakers themselves are connected directly to the subwoofer. After you insert the plug into the corresponding socket, a dialog box appears on the desktop. Check the box next to Line Out and save the settings.
Step 4
Even if the drivers are installed and the audio system is connected, it is possible that the sound will not be played. In this case, set all sliders in the sound settings to the maximum position, it is possible that one of them blocks sound reproduction.
