Some owners of USB flash drives face such a problem when an error message appears when copying data from a computer to a media. There can be several reasons for this problem.
It is necessary
- - Flash drive;
- - a computer.
Instructions
Step 1
Remember the last time you removed the USB stick from the USB port? If you did not use the Safely Remove Hardware functionality, the file system might crash.
Step 2
Be aware that physical damage can also affect the performance of the device. Take a close look at the USB flash drive - are there any scratches or impact marks on it? Some devices are write protected. If you find a small lever on the side, try sliding it.
Step 3
If the error appears due to a file system failure, use the HPUSB Disk or JetFlesh Recovery Tool. Pay attention to standard Windows tools. Open "My Computer", right-click on the flash drive icon, then select the "Properties" line in the pop-up window that appears with the context menu.
Step 4
You will see five tabs: General, Autostart, Hardware, Access. In the general tab, try to rename the device, in the "Autostart" tab, click the "Restore defaults" line. The next tab is Tools, defragment your disk, or check your device for errors.
Step 5
Pay attention to the "Hardware" tab - click the "Properties" button, diagnose the device, or optimize for better performance.
Step 6
The Sharing tab lets you share your device - useful if you have a local network configured between multiple computers.
Step 7
Try all the steps one at a time - the error should be eliminated. Keep in mind, if the flash drive has been damaged, you will have to throw it away.
Step 8
Please note that if the password is set using special utilities, it is impossible to delete it without knowing the password itself. You will not be able to use the USB flash drive even if you try to format the device.
