Removing the password on the hard drive and laptop BIOS is a fairly common problem that users often encounter. There are several methods (utilities) that can help remove the password. At the moment, many utilities are popular in solving this problem. To remedy this situation, you need to follow certain rules.
Necessary
PC
Instructions
Step 1
If you set a password and forget it, the program data will be useful to you:
BIOS_PW. EXE (18KB) for removing the password on the computer BIOS.
HDD_PW. EXE (18KB) to remove the password from the hard disk.
Step 2
Next, about unlocking the password. First, you need to find out the error code.
Step 3
To do this, when loading, press “F2” and enter the wrong password three times.
Step 4
Then the system will display “System Disabled [12345”].
Step 5
Run the MS-DOS application.
Step 6
Next, in the opened DOS window, select the name of the program.
Step 7
Enter a five-digit error code separated by a space, which the laptop displays when the password is incorrectly typed.
Step 8
Add the digit 0 through a space.
Step 9
Now press Enter. The program will provide you with several passwords. One of them should go to the BIOS.
Step 10
After entering passwords on BIOS or HDD, do not forget to change them to new ones.
Step 11
In the event that you try to perform the above described actions on a 64-bit platform, difficulties may arise.
Step 12
The system will report that it is impossible to run a utility or component, because the program is not compatible with the 64-bit version. The solution is pretty simple.
Step 13
Download DOSBox from the developer's site, install and run.
Step 14
First, mount the C drive. You can do this with the following command: “mount c c: /”.
Step 15
Then again at boot time press “F2”, and enter the wrong password three times.
