When installing an additional video card instead of an integrated device, it becomes necessary to disable the integrated video adapter. In most cases, BIOS setup will be required, which can be done without the need for a specialist.
Instructions
Step 1
After completing the installation of the new video card in the appropriate slot on the motherboard, turn on the computer. It is possible that the new device will be automatically activated, and the built-in adapter is disabled. To check which video card is active, go to the Windows Control Panel. The currently running video card will be displayed in the Display Adapters section of the Device Manager dialog box.
Step 2
If after installing the device, the integrated video adapter was not automatically disabled, restart the computer, and after turning it on, hold down the Delete (Del) key to enter the BIOS menu. On some computers, access to control of the base operating system occurs after pressing one of the function keys (F2-F10). The desired key can be determined by the selection method or clarify this information in the motherboard instruction manual, and if you have a portable device, in the instructions for it.
Step 3
In the BIOS, find the Integrated (or Onboard) Video section under the Integrated Peripherals menu. Disable the device by selecting Off instead of On or Disabled instead of Enabled. Exit the BIOS by pressing the F10 (Save and exit) key. After Windows boots up, open Device Manager and check the changes made in the settings for the video adapters.
