Monitors, like TVs, are difficult to reflash. This is due to the presence of the microcircuit in the design of the device. Do not start flashing the monitor unnecessarily and be sure to merge the old information from the chipset to the computer.
Necessary
- - soldering iron;
- - set of tools;
- - programmer.
Instructions
Step 1
Find the service manual for your LG monitor model. Without it, do not start flashing, since this process involves unsoldering its microcircuit. Familiarize yourself with the sequence of disassembling the device, and then remove the monitor chip. Be careful when doing this. In the absence of experience with microcircuits, in any case, do not start flashing yourself.
Step 2
Purchase a programmer in advance for flashing your monitor's microcircuit. You can find programmers in radio stores in your city, as well as order them in an online store or make yourself if you have the skills to work with such equipment, for this you will need to download the circuit from the Internet.
Step 3
Connect the programmer to the computer and use a special utility to drain the information from the connected monitor microcircuit. This is necessary in order to avoid problems with the new firmware program of the device in the future.
Step 4
Download the new firmware for your monitor. It is best to choose the programs provided specifically for your model, otherwise you may damage the monitor, and you will have to contact the service center for repair. You can use the software available at the following link: https://master-tv.com/proshivki/mon/LG-eeprom-memory-dump.html. Please note that all firmware programs downloaded to your computer must be checked for viruses before installation.
Step 5
Flash the microcircuit of your monitor with the downloaded and virus-tested firmware program using the programmer. Remove the circuit from it and return it to the monitor, firmly fixing it in position. Turn it on and test the new software.
