The hard disk is an important part of the computer that is responsible for storing and transferring data. Insufficient disk speed can cause unstable operation of the operating system, as well as lead to destruction of the computer or laptop at the hardware level. To prevent undesirable developments, you need to download and install the necessary software for measuring the speed of the hard drive.
Necessary
- - Internet connection;
- - special software.
Instructions
Step 1
Check the manual to find out the model of the storage device installed on your computer.
Step 2
Go online. Search for "HDD forum". Explore forums where users discuss hard drive specifications, what programs they use to determine and tune spindle speeds. Here are some addresses of major sites where you can get help and good advice: ClubControl (https://www.clubcontrol.ru/forum/), HDD forum (https://hdd.kulichki.com/forum/), Monitor (https://monitor.net.ru/forum/) and others. On the Internet, you can find a large number of programs, both paid and free. However, not all of them work equally well with different hard drive models.
Step 3
Download and install the required software. Now turn off your computer and let it rest for 10-15 minutes. To determine the actual speed of rotation of the disk, it is necessary to measure in a system that has not yet had time to receive a large load and is in perfect condition.
Step 4
Run the program. Examine the list of physical disks, which are presented as a list or diagram. Select the drive you want to know the information about at the present time.
Step 5
Run a speed test called Benchmark. Usually, using this test, it is possible to obtain information that gives a completely objective picture of the state of the disk as a whole. Click the Start button and wait for the testing procedure to complete.
Step 6
Analyze the data collected by the program. Pay attention to a few critical points. First, look at the Transfer Rate Minimum. This indicator defines the minimum transfer rate, while the Transfer Rate Maximum indicates the maximum. Then move on to an average speed called Transfer Rate Average. Write down the numbers or save them in any other way.
Step 7
Check Access Time, a metric that describes the average file access time, measured in milliseconds. Together with Burst Rate, Access Time is a very important characteristic to consider. Also record the CPU load while the hard disk is spinning.
Step 8
Compare all the data collected by the program with those provided by the HDD manufacturer in the instructions for using the computer. Pay attention to the fact that the numbers of indicators may differ significantly, but this does not always indicate a breakdown of the HDD. The operating conditions have a great influence on the test results.
