Some modern laptop models have two video cards. Usually this is an integrated video adapter built into the chipset and a discrete full-fledged video card. The presence of these devices allows you to ensure maximum performance and extend the life of the device without recharging.
Necessary
Everest
Instructions
Step 1
If you decide to replace a discrete graphics card in a laptop, then first select the model that is suitable for this equipment. Install the Everest program and run it. Find the Graphics Devices menu and open it.
Step 2
Examine the characteristics of the installed video adapter. Pay particular attention to the type of motherboard connector that the discrete graphics card is connected to.
Step 3
The difficulty with upgrading a laptop video card is that it needs to be sized properly. If you can install almost any video adapter in a stationary computer, then there may simply not be enough space in a laptop. Therefore, study the characteristics of your favorite video card models. Pay attention to their size.
Step 4
Now disassemble the laptop and carefully remove the installed discrete graphics card. Take it with you to the store. Compare the dimensions of the new video adapter with your old card. If you are sure that a new discrete card can be installed in your laptop, feel free to buy the model you like.
Step 5
Connect your new graphics card to your laptop and turn it on. Most likely, the integrated video adapter will be active initially. Be sure to install software that allows you to switch video cards.
Step 6
If your laptop is powered by an Intel processor, then you need the Intel Graphics Media Accelerator utility. It automatically switches video cards in the event that the integrated adapter cannot cope with the load.
Step 7
If your laptop has an ADM processor installed, download and install the ATI Catalyst Control Center program. With its help, you can independently choose a suitable video adapter at the moment or simply disable an unnecessary video card.
