Canon PGI-5Bk and CLI-8 cartridges are very similar in design to their predecessors - Canon BCI-3 and Canon BCI-6 cartridges. It is recommended to use the same refilling method for all these cartridge models.
Necessary
drill, gloves and InkTec ink
Instructions
Step 1
Remove the cartridge from the printer.
Step 2
Close the cartridge outlet. This is done with a special orange plug.
Step 3
Drill a hole in the cartridge. This should be done in the place where the oval with the inscription "PUSH" is located.
Step 4
Syringes are used for refueling. An individual syringe with a needle on is needed for each color.
Step 5
Calmly and slowly, use the syringe to inject the cartridge ink into the drilled hole.
Step 6
Close the filler hole with the plug.
Step 7
Clear the cartridge outlet. Put it in the printer.
