To prevent damage to the computer's video adapter as a result of overheating, it is recommended to timely service or replace the fan installed on it. To do this, you must select the correct device.
Necessary
- - crosshead screwdriver;
- - glue.
Instructions
Step 1
Download and install the Speed Fan software. Run this application and see the readings of the temperature sensors. Try increasing the speed of the fan blades. If this did not help to reduce the temperature of the video card enough, then proceed to replacing the cooler.
Step 2
Choose the right fan. Ideally, it is better to use a device from a similar video adapter model. If this is not possible, then try to find a similar cooler. Disassemble the system unit and remove the video card from it, after turning off the computer. Be sure to disconnect the system unit from the AC power.
Step 3
Visually examine the method of attaching the cooler to the video card. Consider whether it is possible to use a fan with a different type of mount. Sometimes you can just glue the cooler to the cooling heatsink. Find out the type of power connector. Find ports with a different number of channels on the motherboard in advance. The fan can be connected not to the video card, but to the motherboard.
Step 4
Get the right cooler. Screw it to the video card or glue it to the radiator grill. Make sure the new cooler will not overlap important slots on the motherboard. If you chose the second method of fastening, then wait until the glue is completely dry. Install the video card into the system unit. Connect the fan power to it or to the motherboard.
Step 5
Turn on the computer and check that the blades rotate steadily. Run the SpeedFan program after loading the operating system. Adjust the parameters of the new fan. Achieve the ideal balance of efficiency and energy consumption. If you cannot do it yourself, then check the box next to the "Fan Autospeed" parameter. Minimize the program, but do not close it.
