Some devices that make up a personal computer get very hot during its operation. To cool them, special fans are used, connected to them or installed inside the system unit.
Necessary
- - AMD OverDrive;
- - SpeedFan.
Instructions
Step 1
To prevent overheating of certain devices and their subsequent deterioration, it is necessary to control the temperature of individual elements. For this, temperature sensors are installed on some equipment. Download SpeedFan software and install it. Run this utility after the installation is complete.
Step 2
Open the "Indicators" tab and view the temperatures of the desired devices. Equipment whose temperature is above the recommended level will be marked with a special sign. At the bottom of this menu is a list of fans. Each of them corresponds to a specific device. Increase the rotational speed of the blades of certain coolers to lower the temperature of the desired devices.
Step 3
Activate the "Auto fan speed" function by checking the box next to the corresponding item. Click the "Minimize" button to keep the program running in automatic mode.
Step 4
If using the described utility you could not get access to the required coolers, then install the ADM OverDrive program. Run it and click OK in the window that appears. Open the Fan Control menu located under the Performance Control column. Increase or decrease the rotational speeds of the required coolers. To do this, move the sliders below the fan graphics.
Step 5
Click the Apply button. This is necessary to save the specified settings. Now click the OK button and close the program. To estimate the temperatures of the desired devices, you can use other programs, such as Speccy or Everest. Remember that these utilities do not allow you to change the parameters of the equipment operation, but only analyze their state. If you need full access to some devices, use the Riva Tuner software.
